Filter

Ubiquiti EdgeRouter PoE 5-port

KSh11,000.00 Ex.VAT

Confirm & Order Here

Description
Reviews (0)

Ubiquiti EdgeRouter PoE 5-port

The Ubiquiti EdgeRouter PoE 5-Port is a router with passive PoE support for network devices. It is powered by the EdgeOS, which provides various features and options for network configuration . It has a high-performance routing capability of one million packets per second .

It can also be configured to support 24V or 48V PoE on each port, which is useful for powering up multiple Ubiquiti access points .

The EdgeRouter PoE 5-Port offers high-performance, hardware-based switching and PoE capabilities in an affordable and compact 5-port device

The ERPOE-5 EdgeRouter PoE 5-Port Advanced Network Router from Ubiquiti Networks combines reliability with enterprise-level features. Powered by a proprietary and intuitive graphical interface, and EdgeOS, the EdgeRouter can easily be configured for routing, security, and management features to efficiently run the network.

For advanced network professionals, an integrated CLI is available for quick and direct access, using familiar commands. This router is capable of routing up to 1 million packets per second.

Ubiquiti Networks ERPOE-5 Specifications

TECHNICAL
Processor	Dual core 500 MHz, MIPS64 with hardware acceleration for packet processing
System Memory	512 MB DDR2 RAM
On-Board Flash Storage	2 GB
Operating System	EdgeOS

NETWORKING INTERFACES
Serial Console Port	1 x RJ-45 serial port
Data Ports	2 x 10/100/1000 Ethernet router ports 3 x 10/100/1000 Ethernet router/switch ports

EDGEOS SOFTWARE SPECIFICATIONS
Interface/Encapsulation	Ethernet 802.1q VLAN PPPoE GRE IP in IP Bridging Bonding (802.3ad)
Addressing	Static IPv4/IPv6 addressing DHCP/DHCPv6
Routing	Static routes OSPF/OSPFv3 RIP/RIPng BGP (with IPv6 support) IGMP proxy
Security	ACL-based firewall Zone-based firewall NAT
VPN	IPSec site-to-site and remote access OpenVPN site-to-site and remote access PPTP remote access L2TP remote access PPTP client
Services	DHCP/DHCPv6 server DHCP/DHCPv6 relay Dynamic DNS DNS forwarding VRRP RADIUS client Web caching PPPoE server
Quality of Service (QoS)	FIFO Stochastic Fairness Queuing Random Early Detection Token Bucket Filter Deficit Round Robin Hierarchical Token Bucket Ingress Policing
Management	Web UI CLI (Console, SSH, Telnet) SNMP NetFlow LLDP NTP UBNT discovery protocol Logging

LAYER 3 FORWARDING PERFORMANCE
Packet Size	64 Bytes 1,000,000 pps 512 Bytes or larger 3 Gb/s (line rate)

LEDS PER PORT
Serial Console Port	Power
Data Ports	PoE, speed/link/activity

POE CONFIGURABLE PER PORT
Data Ports	Off/24 V/48 V*

ELECTRICAL
Power Consumption	Maximum: 60 W
Power	24 VDC, 2.5 A power adapter (included)
Power Input	24 VDC input (Supported Range: 18 to 26 VDC) or 48 VDC input (Supported Range: 38 to 54 VDC)
Power Connector Size	DC power jack Inner Diameter: 2.1 mm Outer Diameter 5.5 mm
PoE with 24 VDC Power Adapter (Included)	PoE Out Voltage Range: 22 to 24 VDC Maximum PoE Wattage Per Data Port: 12 W (24 V) Maximum PoE Wattage Combined for All 5 Data Ports: 50 W PoE Method: Passive

GENERAL
Button	Reset
Wall Mount	Yes
Operating Temperature	14 to 113°F (-10 to +45°C)
Operating Humidity	10 – 90% (non-condensing)
Certifications	CE, FCC, IC
Dimensions	7.87 x 3.54 x 1.18″ (19.98 x 8.99 x 2.99 cm)
Weight	12.7 oz (360.0 g)

To set up your EdgeRouter PoE 5-Port, you can follow these steps:

Connect an Ethernet cable from the Ethernet port of your computer to the port labeled eth0 on the EdgeRouter PoE .
Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet (e.g., 192.168.1.100) .